2MTH2-3828 Precise Cost Effective Corona Fighter Temperature Measurement Thermal Camera
- Real-time temperature data transmitting
- Auto focus, fast and precise temperature measuring Spot/line/area/isotherm analysis tools,
- Compact size: easy to install in small spaces
Product Documents
Downloads
The corona precision thermal camera fighter designed to detect high fever from mass movement of people. Designed for airport terminal and gate. Corona thermal fighter can be installed at international entry terminal in airports across the nation to detect any individual with high fever. Once a person with high fever is detected they can be isolated from the crowd to eliminate or minimize cross infection. The CDC have stated a high fever is the most common symptom among the people infected with COVID-19 virus. Therefore, using thermal imagery to isolate people for further testing will drastically help spreading the covid-19 virus around. 2M Technology designed thermal camera specifically for the ongoing dangerous pandemic of COVID-19 a.k.a the corona virus.
The challenge with using thermal cameras is the camera capability to track multiple faces simultaneously. Such applications are necessary with high traffic areas such as airports, subway stations, railway, bus stations etc. 2MTH2-3828 2nd generation was designed for that requirement.
Features:
- Frequency 50Hz, Gigabit network: support temperature data transmitting real-time
- Auto focus, fast and precise temperature measuring Spot/line/area/isotherm analysis tools, simpler and more flexible to retrieve temperature data
- Compact size: easily install in small space
- Support multi-protocols: TCP, UDP, ICMP, DHCP, RTSP
- Patented intelligent compensated temperature measurement algorithm: accuracy of ±0.3°C
Imaging:
Weight | 4 lbs |
---|
IMAGING | ||
Detector | VOx uncooled thermal FPA | |
Resolution | 384×288 | |
TEMPERATURE MEASUREMENT | ||
Measurement Range | 0°C~60°C | |
Accuracy | ±0.3°C@ 33°C~42°C of target temperature | |
Flux | >100 people/minute | |
Measurement Mode | Intelligent human face tracking and measuring | |
High Temperature Alarm | Pop out window, audible alarm, capture alarm | |
CONNECTOR | ||
Network Protocol | TCP, UDP, ICMP, IGMP, DHCP, RTSP | |
Network Connector | RJ45 | |
LENS | ||
Focal Length | 7.8mm | |
Focus | Auto focus/manual focus | |
POWER SUPPLY | ||
Network |
Power voltage | 10~36V DC |
@25°C Typical Consumption | ≤3W | |
Power Protection | Support over-voltage, under-voltage, reverse connection protection | |
POE | Support | |
SOFTWARE | ||
SDK | Support | |
Professional Analysis Software | Support | |
GENERAL | ||
Dimension | 55 x 55 x 119 (mm)(L x W x H) | |
Working temperature | -10°C -+60°C | |
Storage temperature | -20°C – +65°C | |
Shock | 30g, 11ms, all axes | |
Vibration | 4.3grandom vibration, all axes | |
Humidity | 5~95%, non-condensing |