, ,

2MTHFR-2MSA Face Recognition Terminal with Digital Temperature Measurement Module

  • Supports non-contact detection, support warning people with abnormal body temperature
  • Quickly confirms personnel information and detects body temperature detection
  • Can be configured for temperature detection threshold value
  • Non-contact temperature detection module, measurement range is between 30˚C to 45˚C,
  • Measurement accuracy can reach 0.1˚C, measurement deviation is less than or equal to 3˚C, and measurement distance is 1m
  • Face recognition distance: 0.3m to 5m

Product Documents

2MTHFR-2MSA digital temperature measurement face recognition terminal is a kind of terminal device with precise recognition rate, large storage capacity and fast recognition, which integrates 2M face recognition technology and non-con- tact temperature detection technology. The digital temperature measurement module supports rapid body temperature detection. Thus, the product can achieve face recognition and temperature detection at the same time, and sup- port warning people with abnormal body temperature. It can be widely applied in the crowded places, such as smart communities, schools, office buildings, hospitals and other important areas.

Features:

  • Support non-contact detection, support warning people with abnormal body temperature
  • Support body temperature detection and personnel information binding, which can quickly confirms personnel information and detects body temperature
  • Support configure temperature detection threshold value, and personnel access authority can be configured through temperature detection threshold value
  • Non-contact temperature detection module, measurement range is between 30˚C to 45˚C, measurement accuracy can reach 0.1˚C, measurement deviation is less than or equal to 3˚C, and measurement distance is 1 meter
  • Deep learning algorithm model based on 2M independent intellectual property rights, face recognition accuracy rate >99%, false rate <1%
  • Built-in deep learning dedicated chip, supports local offline recognition, 10,000 face capacity, face whitelist (1:N)
  • Fastest recognition time 0.2 seconds, various model merge mode are used to reduce false rate and increase pass rate
  • WDR, 2MP (1080P) low illumination wide-angle camera and F1.6 large aperture lens for capturing high quality image with various complex lighting scenes
  • Support anti-spoofing detection based on deep learning algorithm, effective against fraud such as photo and video
  • Face metering and human metering for fast adapting to ambient light
  • Face recognition distance: 0.3m to 5m
  • Screen sleep mode, keep the minimum brightness to prevent glare at night
  • Add up to 6 photos of the base library for a single person
  • Video capture, support ONVIF protocol
  • Face, card, password and QR code authentication to control door open
Operation System Linux
Face Recognition Accuracy Rate >99%
Face Recognition Time 200ms
Face Capacity 10,000
Storage Capacity 4GB
Event Capacity 30,000 (with images)
Measurement Range 30°C – 45°C
Measurement Accuracy 0.1°C
Measurement Deviation ≤±0.3°C
Measurement Distance 1m
 

Authentication Mode

Face Whitelist: (1:N)
Card:(1:N)
Face +Body temperature
Door Opening Method Face, Password, QR code, Card
Communication Mode 10/100Mbps adaptive network port
User Management Support user library addition, deletion, update
Record Management Support local recording and real-time upload
 

Interface

LAN×1, Wiegand Input×1, Wiegand Output×1, RS485×1, RS232×1, I/O Input×2, I/O Output×2, USB2.0×1
Power Supply Input 12V±20% DC, Output 5V DC
Screen Non-Touch Screen, Size:7 inch, Resolution: 600×1024
Camera Single Lens, 2MP, 1080P
Supplement Light LED soft light
Dimensions (L×W×H) 134.4mm×153.1mm×550.5mm
Working Environment For access control terminal: -20°C~+65°C, Relative

Humidly<95% (non-condensing)

Protection Level For terminal: IP 65, for module: IP 54
Application Situation Indoor, No wind