Features
Built for Class II, Division 1 Hazardous Locations
The 2MEP04-IP2M30X is specifically built for environments where combustible dust is present during normal operations. Rated Class II, Division 1, the camera is ideal for facilities handling powders, grains, fibers, and other fine particulates that pose an ignition risk.
The corrosion-resistant 304/316L stainless-steel housing is sealed to prevent dust ingress and engineered to contain internal explosions, protecting operators and critical infrastructure. With its dual international certification, Ex d IIC T6 Gb / Ex tD A21 IP68 T80°C, the camera meets the strictest safety standards for:
- Combustible dust (Class II)
- Group E/F/G environments (metal dust, carbon dust, grain dust)
- Division 1 areas where dust is present during normal operation
From grain handling to chemical blending, this PTZ camera delivers reliable, compliant monitoring for high-risk facilities.
Rugged Industrial Construction for Dust-Intensive Sites
Engineered to perform in the harshest dust-laden environments, the camera includes:
- IP68 ingress protection to prevent dust accumulation
- Temperature rating from -30°C to +70°C (-22°F to +158°F)
- Electropolished stainless-steel finish (optional)
- M25 sealed cable thread for a secure dust-proof connection
Its durable build withstands metal particulates, fine powders, and airborne fibers commonly found in Class II, Div 1 zones such as mills, silos, refineries, and manufacturing plants.
Full-HD Imaging with 30× Optical Zoom for Long-Range Monitoring
Equipped with a high-performance 5.1–153 mm lens and 30× optical zoom, the 2MEP04-IP2M30X captures long-distance detail for process monitoring and situational awareness. Features include:
- Full HD (1080p) resolution up to 30 fps
- 5.1–153mm focal length
- 30× optical zoom
- 16× digital zoom for extended reach
- 55.2°–2.7° field of view (wide–tele)
- Fast 5-second zoom transition (wide to tele)
- Minimum illumination of 0.0005 Lux (color @ F1.67)
This allows operators to monitor wide areas, then zoom in for equipment inspection, personnel safety verification, or long-distance threat detection, all without losing clarity.
Advanced Imaging for Dust-Heavy Industrial Worksites
The camera is equipped with a 1/2.8″ progressive scan CMOS sensor and intelligent image adjustments, including:
- 3D Digital Noise Reduction (3D DNR)
- Electronic Image Stabilization (EIS)
- Backlight Compensation (BLC)
- Custom BMP overlay for compliance or site labeling
- ROI (Region of Interest) for optimized bandwidth use
- Adjustable saturation, brightness, contrast, and sharpness
- Multiple exposure modes (AE, Shutter Priority, Manual, Aperture Priority)
Even in low-light or dusty atmospheres, operators can view clear and stable footage.
High-Speed PTZ Operation for Large-Area Surveillance
The explosion-proof PTZ head offers fast and precise positioning for real-time operational awareness:
- 360° continuous horizontal pan
- -90° to +90° vertical tilt
- Horizontal speed: 1–300°/s
- Vertical speed: 1–180°/s
- 256 preset positions
- Automatic cruise with two customizable patrol routes
These capabilities make it ideal for large-area monitoring, perimeter control, and proactive risk detection in silos, conveyors, mixer rooms, loading operations, bagging lines, dust collection systems, and outdoor industrial yards.
Secure, Reliable Connectivity for Critical Operations
Built for industrial networks, the camera supports:
- H.265 / H.264 compression
- Bitrates from 32 Kbps to 16 Mbps for flexible bandwidth control
- ONVIF Profile S & G for NVR/VMS compatibility
- TCP/IP, HTTP/S, FTP, DHCP, DNS, RTP/RTSP, SNMP, NTP, SMTP, and IPv6
With triple-stream output, operators can record in full resolution while streaming lower-resolution video for mobile or remote monitoring.
The integrated 0.8m armored cable and AC24V power input ensure stable performance in industrial installations.
Flexible Installation Options
Designed to simplify deployment in complex facilities, the camera supports:
- Wall mount installation
- Suspended/lifting installation
Its compact stainless-steel body 240 mm × 304 mm (9.45 in × 11.97 in) and weight of 23 kg (50.71 lbs) make it suitable for confined or elevated hazardous locations.
Applications: Designed for Class II, Div 1 Dust Hazard Areas
- Grain silos, flour mills & feed mills
- Sugar plants, spice processing, and food powder production
- Aluminum, magnesium, and metal dust environments
- Pharmaceutical and chemical powder mixing
- Plastics, rubber, resins, and polymer manufacturing
- Woodworking, sawmills, pellet plants, and furniture factories
- Cement, gypsum, and mineral processing
- Battery manufacturing (carbon & metal dust)
