Our explosion proof thermal cameras are engineered for hazardous environments where safety and performance are critical. Designed to operate in areas with flammable gases, vapors, and dust, these cameras provide reliable thermal imaging for temperature monitoring, equipment inspection, and perimeter security.
With ATEX and IECEx certifications, they ensure compliance with international safety standards while delivering accurate heat detection in total darkness or smoke-filled conditions. Ideal for oil refineries, chemical plants, and industrial zones, our explosion-proof thermal cameras help prevent overheating, detect anomalies early, and maintain 24/7 operational safety.
| 2M Model | Thermal Lens Size | Enclosure Material | IR Distance | Optical Zoom | Best Application |
|---|---|---|---|---|---|
| 2MEPT04-TH6435MM | 304 Stainless Steel | 35 mm | 100 m (328 ft) | 30x | Mid-range thermal scanning for inland industrial sites, localized tank farms, and refineries |
| 2MEPT16-TH6435MM | 316L Stainless Steel | 35 mm | 100 m (328 ft) | 30x | Mid-range thermal scanning for corrosive marine environments, offshore platforms, and coastal chemical plants |
| 2MEPT04-TH6450MM | 304 Stainless Steel | 50 mm | 100 m (328 ft) | 30x | Long-range thermal detection for expansive inland pipelines, large perimeters, and surface mining operations |
| 2MEPT16-TH6450MM | 316L Stainless Steel | 50 mm | 100 m (328 ft) | 30x | Long-range thermal detection for highly corrosive offshore drilling rigs and massive coastal LNG terminals |
Our explosion proof thermal cameras are deployed across a wide range of critical infrastructure and high-risk verticals:
Under the National Electrical Code (NEC) Article 500, all wiring in Class I/II hazardous areas must use conduit sealing fittings (EYS/EYD), explosion proof conduit bodies, and intrinsically safe or explosion-proof junction boxes. Texas requires a licensed contractor; 2M Technology holds Security License B15309 and partners with licensed electrical contractors for all classified-area camera projects. For site-specific explosion proof thermal cameras selection assistance, contact 2M Technology at (214) 988-4302 — we match explosion proof cameras to your hazardous area classification report and provide installation by licensed contractors.
Purchasing an integrated explosion proof thermal camera saves significant installation time and guarantees total system compliance. When you buy a separate housing and camera, the integrator is responsible for ensuring the camera fits, managing the internal heat load, and correctly wiring the components without compromising the explosion proof seal. An integrated camera arrives fully assembled, pre-wired, and globally certified as one complete device.
Active IR cameras work by shining an invisible beam of infrared light onto a scene and recording the reflection, much like a flashlight. Thermal cameras do not emit any light at all. Instead, they passively read the natural heat radiating from people, vehicles, and equipment. This makes thermal imaging far superior for cutting through heavy fog, thick smoke, or blinding sun glare.
No. Thermal cameras detect invisible heat signatures rather than visible light. Because they do not rely on light to create an image, they can provide clear, high-contrast video in absolute pitch-black darkness. This eliminates the need to install expensive, heavy-duty explosion proof floodlights around your hazardous facility.
Thermal cameras cannot see through solid objects like walls, heavy doors, or metal enclosures. However, they are incredibly sensitive to surface temperatures. For example, when pointed at a solid chemical storage tank, the camera will clearly display the temperature difference on the outer metal shell, allowing you to accurately monitor internal fluid levels from the outside.
Standard tempered glass completely blocks thermal radiation, which would blind a thermal sensor. To solve this, our cameras are equipped with a specialized germanium viewing window. Germanium is a rugged metalloid that allows thermal wavelengths to pass through flawlessly while maintaining the extreme structural strength required to pass rigorous explosion proof safety tests.
Yes! If you have a specific thermal camera model that needs explosion-proof protection, we can create a custom housing for it, even if it’s from another brand. We ensure the housing fits your camera’s exact dimensions, includes any special features you may need (such as a heater, cooler, sunshade, or wiper), and meets all the safety standards for hazardous areas classified as Class I, Div 1/2. To find out more about this service, check out our custom explosion-proof housing page.
Texas Security License B15309
Texas Security License B15309
2M TECHNOLOGY Inc. © 2026 | Company based in TEXAS USA – All Rights Reserved
