How to Access NVR from Web

You are here:
< All Topics

This guide is valid for models 2MN-8004-P4, 2MN-8008-P8, 2MN-8116-P16, 2MN-8232-P16.

When devices are connected to the network, they can also be accessible from a computer. The first thing you need to make sure of is that the computer you are using and the NVR are connected to the same network (network is coming from the same router for both devices). You will first need to obtain the IP address of the NVR from Menu System Network IPv4 address.

After noting the IP address of your device, open Internet Explorer and in the address search bar type in the NVR IP address. If the NVR and the computer are on the same network then it will pull up the login page of the NVR. The credentials will be the same as when you log into the local interface of the NVR.

Previous How can I reset the password for the 2M 8000 Series NVR?
Next How to Enable Audio
Table of Contents