Please check if your DVR is the model: 2MT-7004, 2MT-7008, 2MT-7016. If it is, then we need to switch your
How can I reset the password for the 2M 8000 Series NVR with the new firmware?
This is valid for some NVR models, it depends on the firmware version of them. If they do not have
How can I make sure my device and computer are on the same network?
In order to access network devices from a computer, they both have to be connected on the same network. But
How to Use the Check Template to Create Schedules
The check template supports a time range-based authentication mode with a maximum of eight time ranges available per day. This
What are the function settings?
The 2MITD has 7 main function settings that you access with the password 1111. 1 → Volume: levels 0 –
Which button is which on the 2MITD?
The 2MITD has four main buttons on the left side of the unit which you will use to navigate through
Why is my 2MITD constantly reading temperatures?
The 2MITD is supposed to only read temperature once and it will not alarm again until another temperature is read,
Why am I not hearing a voice from my 2MITD?
The 2MITD is supposed to voice a response when a temperature is read in order to let the user know
How do I reset my 2MITD?
To restore the factory setting on your device, you will first need to enter the password 1234. Then on the
How to Use External QR Scanner
This article is applicable to the facial recognition temperature scanners which are models 2MTHFR-2M or 2MWTK. The external QR scanner