2MAGB-NSN-E Intelligent Parking Lot Barrier Gate (AC Turbine Vortex Pole Motor)

  • Normal-speed of open / close: 3/6 seconds
  • IP54 case with 1.8 mm/5.9′ ft cold-rolled steel plate with durable finish
  • Maximum 6m/19.7′ ft. Straight arm with rubber bar

Product Documents

  • Consistent, low noise, long life
  • IP54 case with 1.8 mm cold-rolled steel plate with car baking finish
  • Normal-speed of open / close: 3/6 sec.
  • Straight arm with rubber bar (telescopic arm optional), Max. length as below:
    – 3 sec. / Max.4.5m
    – 6 sec. / Max.6m
  •  Inclusive of arm ×1,push button ×1,remoter ×2, boom bracket×1
  • Exclusive of anti-collision & LED arrow
    display on housing : need to buy additionally
  • Housing color optional: yellow (default)/red silver/dark silver
  • Arm direction is interchangeable, but the motor & reducer will need to changed out
Dimensions55.1 × 11.8 × 39.4 in
Ingress Protection


Power SupplyAC 85~264V, 50~60HZ, 480W
Motor240W DC-24V brushless servo torque motor 10 million MTBF, 100% duty cycle
Remote (Optional)Distance﹥65ft
Spring1~2 pcs. spring balance
Controller80C51 MCU, 20MHz, PWM variable frequency servo controller board
Loop Detector Inputpulse width 100﹥ ms
IR detector Inputpulse width 100﹥ ms
Up & Down Inputpulse width 100﹥ ms
Traffic Light OutputAC220V output power (passive), current Max. 3A/AC220V
Loop detector Syn. outputRelay NO output, Current Max.0.5A/AC220V, or Max. 1A/DC12V
RS485 Interface9600bps, ASCII decimal encoded
Arm3.38"×1.72" Aluminum alloy octagonal arm with rubber bar, Max. 19.6ft Round arm with foam, Max. 11.4ft
Housing1.8mm cold-roller sheet, IP54
Housing Size (HxWxD)355×267×1035 (mm) / 13.9" x 10.5" x 40.7" (in)
Package Size405×346×1070 (mm) / 15.9" x 13.6" x 42.1" (in)
Gross Weigtharound 46 KG / 101lb
Operating temperature-30C° to 55C° / -22F° to 131F°